Those of us with dry or sensitive skin are often advised to either use a cleanser with no added soap, or avoid soap completely. Why? What exactly are alternatives with no added soap? And how do they work if they don’t have soap in them?

What is soap?

Soaps have been around for thousands of years, traded by the Phoenicians as early as 600 B.C., and popular with the ancient Romans and Celts1. Chemically speaking, soaps are the salts of fatty acids, made by treating vegetable and animal fats with lye, also known as sodium or potassium hydroxide2. This process is called saponification. The resulting soap molecules have a head that’s attracted to polar molecules, like water, and a tail that’s attracted to non-polar molecules, like oils. What makes soap work is that it emulsifies oil and water. Normally, oil and water won’t mix, but with the help of soap the oil is broken into small soap-wrapped droplets that can be rinsed away with water1

How a cleanser with no added soap works

Soaps aren’t the only molecules that can perform this trick. In fact, they’re a small group within a much larger class of chemicals known as surfactants. The word ‘surfactant’ is short for ‘surface active agent’, which means a material that has both a polar and non-polar unit, and acts on the surface of two mediums2. Usually this means water and some type of oil, but it could also be water and air, or any other liquid-liquid or liquid-gas interface2.

Four groups of surfactants

Anionic surfactants: The largest group, accounting for around 65%, with negatively charged heads3. Considered the high-foaming powerhouse surfactants, these include soaps, sulfates (e.g. sodium lauryl sulfate), as well as gentler alternatives like sodium lauroyl sarcosinate4. If you see a surfactant beginning with ‘sodium’ and ending with the ‘-ate’ suffix, it’s safe to say it’s anionic.

Cationic surfactants: Making up only around 3.5% of the surfactant market3. Common cationic surfactants include cetrimonium bromide and benzalkonium chloride.

Nonionic surfactants: At around 28% of the market, non-ionic surfactants make up the second largest group3. They don’t generally make good cleansers, being very low-foaming and mild. However, they find their way into many products as emulsifiers, or ingredients that hold the oil and water parts together in a cream, the same way an egg helps hold together the ingredients in a cake. Some common non-ionic surfactants include glyceryl stearate, PEG-100 stearate, and the ceteths, laureths and ceteareths.

Amphoteric surfactants: Another relatively small group (3.5%), these surfactants have large heads with both a positive and negative charge5. They are very mild on the skin and eyes, and are often used as secondary surfactants, paired with a more powerful anionic surfactant5. An amphoteric surfactant used in a lot of cleansers with no added soap is cocamidopropyl betaine5.

Why use a cleanser with no added soap?

Soap does a fantastic job at removing dirt and oils from our skin. In fact, it’s a little too good at it. As strong anionic surfactants, soaps remove a lot of the natural oils our skin produces to help keep the moisture in, which can be a problem for people prone to dry skin. Milder anionic and amphoteric surfactants remove dirt without stripping away natural oils, which means that using a cleanser with no added soap helps your skin avoid dryness6. If you wanted to try a cleanser with no added soap, give QV Gentle Wash a go.

How do I know if a cleanser has no added soap?

If a label doesn’t specifically state ‘no added soap’, or you would like to check the ingredient list yourself, how can you recognise if it contains soap? Firstly, soaps have very poor solubility, so you’ll almost always find them in a solid bar form. Also, remember that soaps are anionic surfactants, so the first trick is to pick out the prefix (sodium or potassium) and the suffix (-ate). Soaps are named based on the oil or fat they’re made from, so olive oil, once treated with sodium hydroxide, becomes sodium olivate8. Tallow becomes sodium tallowate7. Coconut oil becomes sodium cocoate7.

You get the idea. If you’re up for a challenge, try gathering all the cleansers in your bathroom and pick out any with soap, or see if you can work out which other surfactants are found in these products.

Cleanse with QV

For dry, sensitive or eczema-prone skin, choose QV Gentle Wash which is a soap-free cleanser that contains 15% glycerin to help hydrate skin during cleansing. 9 out 10 dermatologists in Singapore agreed that QV Gentle Wash helps hydrate skin during shower without stripping away skin’s natural oils*. QV’s bath oils and body washes are suitable for all age groups. 

For babies, choose QV Baby Bath Oil or QV Baby Gentle Wash, specially formulated to help care for baby’s delicate and sensitive skin.